BASE COAT

Base Coat

  

Royale Epoxy MN Epoxy Imperial Basecoat is VOC-compliant, high solids, 2-component, and designed as a base coat for color flake (chip) flooring. This application can be applied to new and existing concrete.

Our Imperial Basecoat formula allows a typical floor to be installed within one day and provides excellent adhesion and hide to concrete in a single coat application. Imperial Basecoat withstands up to 9 lbs of moisture vapor emissions. Imperial Basecoat adheres to damp or dry concrete and gives ample open time for broadcasting the color flakes (chips). Adding Royale Epoxy MN Accelerator will speed up a dry time to as little as 2 hours.

IMPORTANT NOTE:
If full broadcast of flake chips is not disbursed, sanding will be required.

Coverage: 200 – 225 SF/Gal Over freshly profiled concrete.Perks to this Epoxy are – Highest adhesion rating to concrete, “350”, Lifetime Adhesion Warranty on residential garage floors, Holds back up to 9 lbs. of Moisture Vapor Transmission.NOTE:This epoxy is specifically designed to be a PRIMER COAT ONLY! You must broadcast to refusal or topcoat this product w/another coat of either “PIGMENTED” Epoxy or Sealer or risk serious ambering.

FLAKE

Flake System (1/4″ Chips) – 25 Lb Box

$88.88

The Royale Epoxy MN Flake System offers a natural stone look for your epoxy, polyaspartic, polyurea, and urethane floor coating system. Royale Epoxy MN Flake System is broadcast into a colored epoxy, polyurea, polyaspartic or urethane base-coat. Our flake systems are sold in 25 lb. boxes. How much to use depends on the look desired. The more flakes used the less you see of the base coat color and more you see the flakes.
  • Coverage:
  • Coverage depends on application
  • Generally, a 25 lb box will cover 250 sqft. – 10 sqft./lb

TOP COAT

Crown Shield

$264.20

Royale Epoxy MN Crown Shield has essentially zero odor. The ideal applications are hospitals, restaurants, kennels, veterinary facilities, health care facilities, and garages etc. It is a two-component, extremely chemical resistant, and non-yellowing aliphatic polyaspartic. It features high gloss, high build, and a cure time of 4 to 6 hours, and generally return to service in 24 hours. It can be installed in extremely high or low temperatures. Royale Epoxy MN Crown Shield is the ideal product when extremely low odor, durability and UV stable system are required.

 
  • Coverage:
  • 200 SF/Gal – Standard Coverage rate over flat surfaces
  • 100 – 175 SF/Gal – Over broadcast surfaces – Flake, Quartz, Sand
  • 150 SF/Gal – This is for a very nice glassy – flat type finish.
Add selected to Cart
Shopping Cart
Scroll to Top